Bow Mount Assembly for Humminbird 360

Price: $95.00
Product prices and availability are accurate as of 2018-09-18 21:12:55 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Bow mounting assembly for Humminbird 360 imaging system. Allows the 360 transducer to be separated from the trolling motor to prevent wires being cut or damaged. Easy deployment requires just dropping it into the cup assembly on the baseplate. 12 inch baseplate attaches to most boats. This mounts baseplate is removable. A 4X4 Aluminum plate is secured to the deck and thumbscrews secure the baseplate to the aluminum plate. To mount the system, the user need only remove the heavy and cumbersome Humminbird bracket assembly and slide the pole into the downrod adapter. A small screw secures the pole to the adapter. Humminbird cables run through the entire length of the downrods. Downrod shaft is 24 inches. Coupled with the Humminbird shaft gives about 44 inches of depth from top edge of the boat.

Product Features

Easy and safe deployment of Humminbird 360 transducer Prevents cable damage (pinching or wraping) by trolling motors Removable baseplate assembly great for trailer boats or boat covers Includes all hardware and pole mounting clips for the downrod Utilizes the Humminbird downrod assembly (requires 1/8 inch hole drilled in the downrod).

Write a Review